TheBambu Lab X2D AMS Combo is an advanced 3D printer featuring a parallel dual-nozzle system, an upgraded AMS 2 Pro multi-material dry box, 300 °C active chamber heating, closed-loop servo motor extruders, and full filament path AI monitoring for seamless multi-color and clean support removal prints.
It uses 1.75 mm filaments. It officially supports PLA (excluding PLA Aero), PETG, ABS, ASA, and TPU through its AMS 2 Pro system, as well as specialized break-away and dedicated support materials.
Printing Technology: Fused Deposition Modeling
Main Extruder Gear: Hardened Steel
Main Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
Auxiliary Extruder Gear: Hardened Steel
Auxiliary Extruder Motor: Stepper Motor
Nozzle: Hardened Steel
Chassis: Plastic and Steel
Outer Frame: Plastic, Glass, and Metal
Max Nozzle Temperature: 300 °C
Included Nozzle Diameter: 0.4 mm
Supported Nozzle Diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter: Built-in
Filament Diameter: 1.75 mm
Material Management: AMS 2 Pro (4-spool capacity, expandable to 16)
The Bambu Lab X2D redefines the desktop gantry with its Hybrid Dual-Extrusion system. Unlike standard dual-head printers that add significant weight to the toolhead, the X2D uses a primary Servo-driven Direct Drive nozzle for high-detail printing and a secondary Auxiliary Bowden nozzle for supports and secondary materials.
This configuration allows for zero-waste support removal and instant color switching without the purge times typical of single-nozzle systems. With a 65°C actively heated chamber, it is built to handle industrial materials like PC, Nylon, and Carbon Fiber composites with zero warping.
Stop overthinking with support – start peeling it off clean. The main nozzle prints the part. The auxiliary nozzle handles the support¹. X2D hands all the messy support work to a helper nozzle with its own material. Wrap steep overhangs, fabric folds, and internal channels with full support, then peel it away clean.
In one print Fuse PLA and TPU in a single model. Create bags, grips, and bumpers that come off the bed ready to use.
Swap colors instantly –Dual nozzles swap in a split second. Enjoy faster color changes, cleaner transitions, and far less waste.
Unlike traditional motor-driven systems, X2D packs a Gear-and-Trigger mechanism into the toolhead. The nozzle-change lever taps the trigger arm, driving an internal gear train to change the nozzle. No extra weight. Just a clean swap.
Two intakes are always better than one. Freshly extruded filament is soft, but the X2D instantly flushes the chamber with cool air from dual left and right intakes. This constant air exchange stabilizes each layer for low-temperature filaments like PLA, cooling every line at exactly the right moment. So even on tricky angles, overhangs stay sharp and bridges stay clean.
The X2D pairs a 300 °C nozzle with a 65 °C actively heated chamber – hot enough for the majority of engineering filaments like ABS, ASA, and nylon. But temperature alone isn’t the point – the active chamber distributes heat evenly, so layers bond strongly from edge to edge. Your large engineering prints come out strong and flat.
Most printers calibrate flow with a single K factor and use it in all scenarios. Bambu Lab doesn’t. Flow Dynamics Calibration³ builds a time-varying, nonlinear model of your entire extrusion system. So whether there’s minor residue inside the nozzle, gradual nozzle wear, or slightly damp filament, the system detects, calibrates, and compensates. Smooth surfaces and sharp edges stop being luck. They repeat.
Extruder gears grind into filament as they feed it, causing small pressure fluctuations that show up as tiny lines on the surface. Exclusive to Bambu Lab, the PMSM servo system⁵ counters this in real time. With resistance and position sampling at 20 kHz, it adjusts electromagnetic torque on the fly, smoothing out every micro-fluctuation before it reaches the surface.
Extrusion pressure stays precisely controlled, so flow stays stable and surface finish remains clean and uniform, print after print.
Ringing and ghosting blur edges at high speed. Active Vibration Compensation cancels them in real time – so edges print crisp, no matter how fast.
Before printing, the AI Liveview Camera and Toolhead Camera scan the build plate for debris and verify plate placement. During printing, they watch for spaghetti, nozzle clumping, and purge-chute jams in real time – pausing the job before it wastes hours of time and filament.
31 sensors span the entire system – monitoring the feeding path, printing process, thermal environment, and machine safety in real time. Every variable that affects your print is measured, checked, and acted on.
Reviews
There are no reviews yet.
Be the first to review “Bambu Lab X2D AMS Combo 3D Printer”Cancel Reply
Reviews
There are no reviews yet.