+251 99 380 2995 | +251 97 022 2227 | [email protected]


Audio Amplifier TDA2030A
Br 100.00
- The TDA2030 IC is a powerful audio amplifier IC able to deliver up to 20W of output power, so you can use it to run a 4Ω speaker at 12W or a 8Ω speaker at 8W.
- Low frequency class AB amplifier most suited for audio amplification
- Can provide up to 20 Watts as output power
- Wide range of power supply from 6V to 36V
- Short circuit and thermal protection is available
- Breadboard friendly
- The TDA2030 is a powerful audio amplifier IC.
- An audio amplifier is nothing but one that has the capability to amplify the audio signals from any audio source such as mobile phone jack or microphone so that volume is increased when the audio is played in a speaker.
- Audio amplifier circuits can also be made using simple op-amps, but if you need higher volume that is loud enough for a room then this power audio amplifier is will be the best choice. This IC can deliver up to 20W of output power, so you can run a 4Ω speaker at 12W or a 8Ω speaker at 8W.
Pin Configuration
- Pin 1(Non – Inverting Input) : Non inverting end (+) of Amplifier
- Pin 2(Inverting Input) : Inverting end (-) of Amplifier
- Pin 3(Ground) : Connect to the ground of the circuit
- Pin 4(Output) : This pin outputs the amplified signal
- Pin 5(Supply Voltage) : Supply voltage, Minimum 6V and Maximum 36V
Applications:
- Used for Audio signal Amplification
- Suitable for high power amplification
- Capable of operating on dual/split power supply
- Can be used to cascade audio speakers
You may also like…
-

Audio Amplifier PAM8302
Br 450.00 -

TDA7265 Audio Amplifier
Br 250.00 -

PAM8403 Stereo Audio Amplifier Module
Br 550.00 -

Audio Amplifier TDA2003A
Br 50.00









