ARDUINO MKR WIFI 1010

  • Fast Shipping

    Receive products in amazing time
  • Easy Returns

    Return policy that lets you shop at ease
  • Always Authentic

    We only sell 100% authentic products
  • Secure Shopping

    Your data is always protected

4,550.00Br

Highlights

  • Microcontroller = SAMD21
  • Board Power Supply (USB/VIN) = 5V
  • Radio module = u-blox NINA-W102
  • Supported Battery = Li-Po Single Cell, 3.7V, 1024mAh Minimum
  • Secure Element = ATECC508
  • Circuit Operating Voltage = 3.3V
  • PWM Pins = 13
  • Digital Pins = 8
  • Analog Pins = 7
  • UART = 1
  • SPI = 1
  • I2C = 1
  • External Interrupts = 10
  • Flash memory = 256KB
  • SRAM = 32KB
  • EEPROM = no
  • USB = Full-Speed USB Device and embedded Host
  • LED_BUILTIN = 6
  • Clock speed = 32.768 kHz (RTC), 48 MHz
  • Size = 25x61mm
  • Weight = 32g.

Description

  • The Arduino MKR Wifi 1010 is a solution to your basic IoT applications.
  • Using this device, you can develop a WiFi-connected sensors network or can produce a BLE device connected to your cell phone.
  • This board is based on the SAMD21 microcontroller and comes with a clock speed of around 32.768 kHz (RTC), 48 MHz. There are 8 digital pins, 13 PWM pins, and 7 analog pins incorporated on the board.
  • The operating voltage is 3.3V while the voltage through USB or Vin is 5V.
  • The Arduino MKR Wifi 1010 is a microcontroller board based on SAMD21 Cortex®-M0 32bit low power ARM microcontroller.
  • The Arduino MKR Wifi 1010 is an improved version of MKR 1000 and is mainly developed for IoT applications.
  • The secure element ATECC508 ensures a safe and secure WiFi connection.
  • This secure element is a crypto device that comes with ECDH (Elliptic Curve Diffie–Hellman) key agreement, which is mainly used to include confidentiality to digital systems including Internet of Things (IoT) nodes employed in industrial networking and home automation.
  • The board carries a USB port to power up the board with 5V. While the Li-Po charging circuit will make Arduino MKR WiFi 1010 run in two ways i.e. either with an external 5-volt source or with battery power.
  • Contains powerful I/O interfaces including 8 digital I/O pins 7 analog pins 13 PWM pins and carries 3.3V operating voltage.
  • The operating voltage is 3.3V while the voltage through USB or Vin is 5V.
  • The clock frequency is 32.768 kHz (RTC), 48 MHz which guarantees the synchronization of internal functions.
  • Comes with internal flash memory of around 256KB which ensures the storage of the Arduino program (sketch). The SRAM is 32KB which is employed to produce and manipulate variables when it’s activated. There is no EEPROM available on the board.
  • Arduino MKR Wifi 1010 and all other Arduino boards are programmed using Arduino IDE software – A professional software developed by Arduino.cc.
  • You can power up your board using a USB port and this is also used to program and test the board. Simply connect the board through a USB cable to your computer and start playing with it.
  • You can power up the board by both USB port or through Vin. The board comes with a built-in Bootloader to burn the program, setting you free from using a separate burner to burn the program inside the controller.

The Arduino MKR Wifi 1010 is mainly introduced for IoT applications. The following are the main applications of this board.

  • Used in embedded systems.
  • Employed in control systems.
  • Used in IoT applications.
  • Employed to create a BLE device with a cell phone.
  • Used to develop sensor network connected with the home router.