Pixhawk 2.4.8 Flight Controller kit with GPS Module

Br 60,000.00

  • Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller 433/915 Telemetry M8N GPS Minim OSD PM Safety Switch Buzzer PPM I2C 8G SD
  • The advanced 32-bit ARM CortexM4 high-performance processor can run NuttX RTOS real-time operating system.
  • 14 PWM/servo output.
  • Bus interface (UART, I2C, SPI, CAN)
  • The integrated backup power and backup controller failsafe.
  • Provide automatic and manual modes.
  • Provide redundant power input and failover.
  • Multicolor LED lights.
  • Provide multi-tone buzzer Interface.
  • Micro SD recording flight data.

Microprocessor

  • 32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
  • Frequency: 168MHZ, 256K RAM
  • 32 STM32F103 backup coprocessor

Sensor

  • L3GD20 3-axis digital gyroscope 16
  • LSM303D 3-axis accelerometer 14/magnetometer
  • MPU6000 6-axis accelerometer/magnetometer
  • MS5607 precision barometer

Interface

  • High voltage compatible UART 1, 2 with hardware flow control
  • 2 CAN
  • Spectrum DSM/DSM2/DSM-X satellite receiver compatible input
  • Futaba SBUS compatible inputs and outputs
  • PPM Signal Input
  • RSSI (PWM or voltage) Input
  • I2C
  • SPI
  • 3.3 V and 6.6 VA DC input
  • External micro USB Interface
  • Pixhawk PX4 PIX 2.4.8 32 Bit Flight Controller 433/915 Telemetry M8N GPS Minim OSD PM Safety Switch Buzzer PPM I2C 8G SD

Packing list:

  • Pixhawk 2.4.8 32bit ARM Flight Controller x 1
  • Safety button x 1
  • Buzzer x 1
  • 8G TF card (IO firmware has written) x1
  • M8N GPS Module x1
  • Black GPS Holder x1
  • Power Module x1 (yellow and black color XT60 connector PM sent at random)
  • Mini OSD w/ shell x1 (2 kind of OSD cable sent at random)
  • I2C Splitter Expand Module x1
  • PPM Module w/ shell x1
  • 433 MHZ telemetry x1
  • 6pin turn 6pin cable x 1
  • 4pin turn 4pin cable x 1
  • 3pin DuPont line x1