Name: EasyDriver A3967SLB
SKU: 9275
Price: 350.00 ETB
Availability: OutOfStock

EasyDriver A3967SLB

Br 350.00

A3967 Microstepping Driver
A3967 controller, double H-bridge controller driver.
Allows to control up to 2 DC motors or a bipolar stepper motor.
It also allows to control a unipolar stepper motor configured as bipolar.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
A3967 DC Motor PAP Driver Stepper – Easy driver
Logic voltage: 5V or 3.3V
MS1 and MS2 jumped to change the microstepping resolution at full, half, fourth and eighth steps (default to eighth)
Compatible with 4, 6, and 8 wire stepper motors of any voltage
Adjustable current control from 150mA/phase to 700mA/phase
Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speeds
Note: Do not connect or disconnect a motor while the controller is powered.This will cause permanent damage to IC A3967.

Out of stock

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver).
The EasyDriver requires a 6V to 30V supply to power the motor and can power any voltage of the stepper motor.
The EasyDriver has an onboard voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you’ve got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.

EasyDriver A3967SLB

Related products