Name: DM556 Stepper Motor Driver
SKU: 9856
Price: 10500.00 ETB
Availability: InStock

DM556 Stepper Motor Driver

Br 10,500.00

The DM556 is a versatile, fully digital 2-phase stepper motor driver (20-50VDC, up to 5.6A) designed for low-noise, high-precision motion in NEMA 23 and 34 motors. Using DSP technology, it supports 16 microstep resolutions up to 25,600 steps/rev, making it ideal for CNC routers, engravers, and automation.
5-24V universal to control signal, without series resistance
TTL compatible and optically isolated inputs to 5.6A
Up to 128 subdivision, 16 selectable micro-step resolutions of 400-25,600 via DIP switches
8 selectable output current settings of 1.4A to 5.6A via DIP switches
Pulse input frequency up to 200 KHz
Protections for over-voltage and over-current.
Output Peak Current: 1.4~5.6A
Input Voltage: 20~50VDC (Typical 24-48VDC)
Logic Signal Current: 7~16mA (Typical 10mA)
Pulse Input Frequency: 0~200kHz
Isolation Resistance: 500MΩ
Vibration: 10-55Hz/0.15mm
Weight: Approx. 260g

Input Voltage: 20V – 50V DC (24V or 36V recommended)
Output Current: 1.4A – 5.6A (Peak), adjustable via 8-position DIP switches
Microstepping: 16 settings (400 – 25,600 steps/rev)
Signal Input: Optically isolated (5V – 24V compatible), supporting pulse/direction (PUL/DIR) or CW/CCW modes
Protection: Over-voltage and over-current protection included
Performance: High-performance, low-speed zero vibration, and low noise

DIP Switch Configuration (Typical)

Current Settings (SW1-SW3): Set based on motor rated current to manage heat.
Microstep Resolution (SW5-SW8): Defines pulses per revolution (e.g., 400 for 1/2 step, 1600 for 1/8 step, etc.).
Half Current (SW4): Enables auto-half current to reduce motor heating when stationary

Common Applications