OR Gate SN74LS32N

Related products

• Add to wishlist

  

  ADS1115 16-Bit ADC

  • WIDE SUPPLY RANGE: 2.0V to 5.5V
  • LOW CURRENT CONSUMPTION: Continuous Mode: Only 150µA Single-Shot Mode: Auto Shut-Down
  • PROGRAMMABLE DATA RATE: 8SPS to 860SPS
  • INTERNAL LOW-DRIFT VOLTAGE REFERENCE
  • INTERNAL OSCILLATOR
  • INTERNAL PGA
  • I2C INTERFACE: Pin-Selectable Addresses
  • FOUR SINGLE-ENDED OR TWO DIFFERENTIAL INPUTS
  • PROGRAMMABLE COMPARATOR
  • This board/chip uses I2C 7-bit addresses between 0x48-0x4B, selectable with jumpers

  500.00Br

  500.00Br Add to cart
• Add to wishlist

  

  SN74LS20N NAND Gate

  • SN74LS20N IC Dual Positive Input NAND Gate
  •  Output current : 8mA
  •  Input : 4
  •  Package type : DIP
  •  Pin number : 14
  • Voltage supply : 5.25 V
  • The minimum voltage supply : 4.75 V
  • Surface mount devices : Mounting through the hole
  • Output current : 8mA
  • Logic chip function : Dual input Multiplexer work with NAND gate
  • Chip logic no. : 7420
  • Chip logic series : LS
  • Operating temperature range : 0 ° C to + 70 ° C

  100.00Br

  100.00Br Add to cart
• Add to wishlist

  

  MAX 232 Level Converter

  • TTL/CMOS to RS232 Converter IC
  • Can support two conversion at the same time (Dual drivers and Receivers)
  • Easy to set-up and initialize
  • Operating speed: 120kbit/s
  • ±30V Input Levels
  • Operating current: 8mA

  250.00Br

  250.00Br Add to cart
• Add to wishlist

  

  Voltage Level translator module

  • This is high speed 8-Bit bidirectional voltage-Level translator module. It is commonly used to match those circuits whose logic level is inconsistent, such as 5V Arduino motherboard IO ports and peripheral modules of 3.3V.
  • Level translation rate: 2Mbps (open-drain driving), 60Mbps(Push-pull driving @VCCA=3.3V)
  • VCCA voltage: 1.2V-3.6V
  •  VCCB voltage: 1.65V-5.5V
  •  Voltage of VCCA should not be greater than VCCB
  • Supports 3.3V-5V, 1.8V-3.3v and other common level translation
  • Applicable to 5V microcontroller and 3.3V module.

  500.00Br

  500.00Br Add to cart
• Add to wishlist

  

  SN74HC574N FLIP-FLOP

   

  • The sn74hc574 high speed octal D-type flip-flops utilize advanced silicon-gate p-well CMOS technology.
  • They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the capability to drive 15 ls-ttl loads.
  • Typical propagation delay: 18Ns
  • Wide operating voltage range: 2v-6v
  • Low input current: 1Ua
  • Low quiescent current: 80Ua maximum

   

  100.00Br

  100.00Br Add to cart
• Add to wishlist

  

  HD74LS90P Counter/Divider

  • Logic Family: LS
  • Logic Function: Counter/Divider
  • Operation Mode: UP Counter
  • Number of Elements per Chip: 1
  • Number of Element Inputs: 2
  • Number of Element Outputs: 4
  • Number of Stages: 4
  • Reset Type: Asynchronous
  • Direction Type: Uni-Directional
  • Triggering Type: Negative-Edge
  • Maximum Propagation Delay Time @ Maximum CL (ns): 50@5V
  • Absolute Propagation Delay Time (ns): 50
  • Process Technology: Bipolar
  • Minimum Operating Supply Voltage (V): 4.75
  • Typical Operating Supply Voltage (V): 5
  • Maximum Operating Supply Voltage (V); 5.25
  • Propagation Delay Test Condition (pF): 15
  • Operating Temperature: 0 °C~ 70 °C
  • Size: 19mm x 8.6mm x 7.2mm

  100.00Br

  100.00Br Add to cart