Name: Temperature Controller YYW-2 0-1024℃
SKU: 10250
Price: 3500.00 ETB
Availability: InStock

Temperature Controller YYW-2 0-1024℃

Br 3,500.00

YYW-2 0-1024℃ Temperature Sensor Temperature Control Relay Detection High Temperature Serial Output with K Type Thermocouple 30A
Input supply voltage: DC 7 ~ 30V universal
Output controllable power: DC / AC within 30A
Probe model: K-type thermocouple Wire length 0.5M
Resolution: 1 degree
Add ms level delay time to prevent output oscillation and cause damage to the entire circuit.
Can turn off the display for a long time, reducing power consumption
Synchronous data acquisition serial output
Screw head specifications: M6

Function Description:

(A and B are the values we can set by ourselves)

P–1: When the measurement is lower than the temperature value A, the relay is activated, and when the temperature is higher than the temperature value B, the relay is disconnected;
P–2: When the measurement is higher than the temperature value B, the relay is activated, and when the temperature is lower than the temperature value A, the relay is disconnected;
P–3: When the measured temperature is between A and B, the relay is turned off, and the relay is closed in other cases;
P–4: When the measured temperature is between A and B, the relay is closed, otherwise the relay is opened;
P–5: When the measured temperature is higher than the temperature value B, the relay is turned on, and the temperature is lower than the A relay is turned off;
P–6: When the measured temperature is higher than the temperature value A, the relay is activated; it is always activated; until the power is cut off manually
P–7: When the measured temperature is equal to A each time, the relay outputs a jog signal

Setting instructions:

Power-on indicates that the measured temperature enters the standby state;

Press K1 for the first time (it takes more than 1 second to be effective to prevent false triggering), the screen flashes: P –1: K2 plus mode, K3 minus mode
Press K1 a second time, the screen flashes: A025 means: A = 25 degrees: K2 and K3 adjust A
Press K1 a third time, the screen flashes: B035 indicates: B = 35 degrees: K2 and K3 adjust B
Press K1 for the fourth time, the display shows the measured real-time temperature indicating that it has entered the standby state;
Press K4 in standby mode to permanently turn off / on the display and switch the low power consumption mode.