Altimeter MPL3115A2

Br 1,250.00

  • The MPL3115A2 is a digital MEMS sensor that measures barometric pressure, altitude, and temperature, communicating via an I2C Interface.
  • This is ideal for accurate measuring of altitude and barometric pressure. It has a typical 1.5 Pascal resolution, which can resolve altitude at 0.3 meters (compare to the BMP180 which can do 0.17m). You don’t need to calibrate the sensor, and it can also measure temperature down to a resolution of +/- degree C. The sensor uses the I2C bus (address 0x60) and the board works on both 3.3V and 5V DC power/logic.
  • Operating voltage 3.3~5V DC
  • Pressure sensing range: 50-110 kPa (up to 10Km altitude)
  • 1.5 Pa / 0.3 m altitude resolution
  • This board/chip uses I2C 7-bit address 0x60
  • Dimensions: 18 x 9 x 2mm
  • MPL3115A2 – I2C Barometric Pressure/Altitude/Temperature Sensor
  • The MPL3115A2 pressure and altitude sensor is a MEMS pressure sensor that generates altitude data. The sensor outputs are converted to digital data by high-resolution 24bit ADC and transfer over I2C, which means that this module easily communicates with most microcontrollers. The unit of pressure and height is Pascaland meterrespectively. The module also measures 12-bit temperature in degrees Celsius.

This sensor has 7 pins:

  • VIN:Module power supply – 5 V
  • +3V3:Module power supply – 3.3 V
  • GND: Ground
  • SLC: I2C Clock
  • SDA:I2C data
  • INT: Adjusting address for I2C communication

Reviews

There are no reviews yet.

Be the first to review “Altimeter MPL3115A2”

Your email address will not be published. Required fields are marked *

You may also like…