+251 99 380 2995 | +251 97 022 2227 | [email protected]
HOTEND CREALITY CR-10S PRO
Br 3,000.00
- Material: aluminum
- Nozzle: brass 0.4mm
- Filament Ø: 1.75mm
- Voltage: 24V / 40W
- Cable length: approx. 1m
- 3D printers of the CR-10S Pro/CR-10S PRO V2/CR-10 MAX
- including heating cartridge (24V 100W)
- incl. temperature sensor (100k-Thermistor)
- incl. brass nozzle (1.75mm 0.4mm)
- incl. Bowden connector (PC4-01)
- incl. Bowden tube (approx. 0.5m)
- incl. heat sink (1.75mm)
- incl. silicon sleeve for the heating block
- Including heating block or mounting block
- Mount or tighten parts if necessary
- replaces old, defective printheads
- Nozzle CR-10S Pro 0.4mm MK8 Nozzle (M6-0.75 Thread)
- Heater Block CR-10S Pro Heater Block (M6-0.75)
- Heatbreak CR-10S Pro Heatbreak (M6-0.75)
- Cooling Tower CR-10S Pro Cooling Tower (M6-0.75)
- Bowden Tube Capricorn XS Series PTFE Tubing
- Thermistor 100k 1% NTC
- Operating Temperature -45° to +260°C
3D Printer Compatibility
- Creality CR-10
- Creality CR-10S
- Creality CR-10 V2
- Creality CR-10 Mini
- Creality CR-10 Max
- Creality CR-10S Pro
- Creality CR-10S5
- Creality CR-10S Pro V2
- Creality CR-6 MAX
- Creality CR-10S Pro V3
- Creality CR-10S Pro V4
- CREALITY CR-10S PRO HOTEND ASSEMBLY
- The specialized Creality CR-10S Pro Hotend Assembly is designed for the M6-0.75 threading featured on CR-10S Pro & CR-10 MAX components.
- The new Creality CR-10S Pro Hotend Assembly, which is designed for theCreality CR-10S Pro, and features the full range of new features that make the CR-10S Pro the new flagship model for�Creality 3D.
- This hotend assembly is supplied from Creality, and can be directly swapped out with no extra modifications required. The reason why it’s not compatible with older models, however, is because these components utilise an M6-0.75 thread, which results in a tighter fit with less leaks, as well as more grip between the components over a shorter length. This is one of the reasons why the tolerances are so impressive on these new Pro variation components, but of course the downside is that these components can’t be used with older Creality 3D Printers.
Improved printhead version of the CR-10 S PRO v2 series (24V = second generation)
- The kit replaces the “old” printhead.
- The aluminum improves the heating and functioning.
- Simple conversion, all necessary components are included. Parts may need to be mounted or screwed tight.
You may also like…
-
3D Filament Ender Series
Br 5,500.00 -
Hot end
Br 2,500.00 -
Ender-3 V2 3D Printer
Br 90,000.00 -
Printer Creality 3D Ender 3 PRO
Br 85,000.00
Reviews
There are no reviews yet.