Compass Magnetometer Sensor HMC5883L

Related products

• Add to wishlist

  

  2 CHANNEL SPEED SENSOR

  • Working Voltage: 3.3V-5V
  • Output Form: Digital Switch Output (0 and 1)
  • Fixed bolt holes for easy installation
  • PCB Size of Small Plate: 3.2cm x 1.7cm
  • Using a Wide Voltage LM393 Comparator.
  • Output status indicator lamp, output high-level lamp out, output low-level lamp on.
  • Output low level with occlusion; Output high level without occlusion.
  • Comparator output, signal clean, good waveform, strong driving ability, more than 15 mA.

  550.00Br

  550.00Br Add to cart
• Add to wishlist

  

  GPS Module NEO-M8N

  • Anti jamming Active CW detection and removal.
  • Extra onboard SAW band pass filter (NEO-M8N/Q).
  • Data-logger For position, velocity, and time (NEO-M8N).
  • With sticker, it is easy and quick to install.
  • Concurrent GNSS: up to 10 Hz
  • tracking sensitivity: -161dBm
  • Capture sensitivity: -148dBm
  • Cold start time: 38s average
  • Warm start time: 35s average
  • Hot start time: 1s average
  • Capture time: 0.1s Average
  • Temperature: 40 to 80
  • Sensitivity2 Tracking & Nav: -167 dBm
  • Cold starts: -148 dBm
  • Hot starts: -156 dBm
  • RTC crystal: Built-In
  • wide power supply voltage: 3.5V~ 5.5V
  • Ublox GPS Module V2.0
  • Material: plastic
  • Size: 55mm
  • Color: black

  5,500.00Br

  5,500.00Br Read more
• Add to wishlist

  

  Nanoradar NRA24

  • NRA24 is a compact K band altimeter radar, which adopts 24GHz ISM frequency band, with 2cm measurement accuracy, small size, high sensitivity, light weight, easy integration, and stable performance, meeting the requirements of multi field applications such as unmanned flight platforms (UAVs/UAS), helicopters, and small airships.lora
  • Voltage supply 5-20V optimum 12VDC
  • Transmit band 24.00-24.20 GHz
  • Output Power(EIRP) 25dBm(adjustable)
  • Power consumption at 5V 1.4/1.5/1.8W
  • Communication interface micro USB/UART
  • Modulation type FMCW
  • Update rate 50Hz
  • Distance measuring range 0.1-50meter at 0dBm
  • Moving Target Detection Radar Working in the 24GHz ISM Band
  • Suitable for various plant protection environments such as grasslands
  • Universal UART/CAN interface
  • Measurement accuracy of 2cm
  • Measurement distance of 50m
  • Compliant with RoHS standards

  49,500.00Br

  49,500.00Br Add to cart
• Add to wishlist

  

  Tilt Sensor

  • SW-520D – Tilt Sensor Module
  • Supply voltage: 3.3 V to 5V
  • Output can directly connected to controller
  • TTL level output
  • Maximum output current : 15mA
  • Can work on low voltages
  • Maximum operating temperature: 0°C to 80°C
  • Easy interface

  450.00Br

  450.00Br Add to cart
• Add to wishlist

  

  GPS Module NEO-6M

  • Models: GY – GPS6MV2
  • GYNEO6MV2 GPS Module NEO-6M GY-NEO6MV2 Board with Antenna for Arduino
  • This module is compatible with APM2 and APM2.5, and the EEPROM can store all of your configuration data.
  • Interface: RS232 TTL
  • Power: 3-5v
  • Baud rate Default: 9600bps
  • Module with antenna, mini size with strong signal.
  • EEPROM save the configuration parameter data when power down.
  • With data backup.
  • With LED signal lights.
  • Compatible with various flight control modules.
  • Module size: Approx. 25 mm x 35 mm / 0.98″ x 1.37″

  850.00Br

  850.00Br Add to cart
• Add to wishlist

  

  MPU6500

  • Power voltage: 3 – 5V
  • Communication mode: I2C / SPI
  • Register: 1MHz
  • SPI / I2C: 400KHz
  • Pitch: 2.54mm
  • Size:15mm*25mm
  • The MPU-6500 is a 6-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor (DMP) all in a small 15x25mm board
  • Digital-output X-, Y-, and Z-axis angular rate sensors (gyroscopes) with a user-programmable fullscale range of /-250, /-500, /-1000, and /-2000 degree /sec and integrated 16-bit ADCs
  • Digital-output X-, Y-, and Z-axis accelerometer with a programmable full scale range of /-2g, /-4g, /-8g and /-16g and integrated 16-bit ADCs
  • Auxiliary master I2C bus for reading data from external sensors (e.g. magnetometer)
  • Internal Digital Motion Processing (DMP) engine supports advanced MotionProcessing and low power functions such as gesture recognition using programmable interrupts

  550.00Br

  550.00Br Add to cart