LASER ENGRAVING ACCESSORIES – Vector 4 Engineering

Home
Shop
About Us
our service
Blog
Contact Us

English (US)
- Tamil
- Spanish
- German
Birr
- AUD
- INR
- AED

SENSOR
- Sensors Megamenu
MOTER AND DRIVER
- MOTOR and DRIVER
  GEAR MOTORS
  
  SERVO MOTORS
  
  BRUSHED MOTORS
QUADCOPTER AND ROBOTIC ACCESSORIES
- quadcopter and robotic accessories
  QUADCOPTER ACCESSORIES
  
  ROBOTIC ARM ACCESSORIES
  
  ROBOTIC CAR ACCESSORIES
ELECTRO-MECHANICAL-COMPONENT
- electro-mechanical-component
  motors
  
  drivers
  
  BEARING
  
  switch
  
  buzzer
  
  relays
  
  solenoid
  
  power supply
  rail and rack
  
  pully idler and belt
  
  fan
  
  motors
  
  drivers circuit
  
  road
  
  rail and rack
ELECTRONIC-COMPONENTS AND INTEGRATED CIRCUIT
- Electronic-components and integrated circuit
  - resistors
  - capacitors
  - crystals_osillators
  - pots-7-trimmers
  - opto-coupler
  - LED
  - diodes
  - transistors
  - SCR
  - TRIMMERS AND POTS
  displays
  
  mosfet
  
  MICROCONTROLLERS
  
  OP-AMPR
  
  voltage-regulators
  
  amplifier-ic-development-boards
  
  clock-and-timer-ic
  
  data-converter-ic
  
  diac and triac
  
  driver-circuit-ic
MEASUREMENT TOOLS
- Measurement ,Tools
  Screw Driver
  
  Battery
  
  Adapter
  
  Glue-Gun Stick
  
  Multimeter
  
  Clamp-meter
  
  Oscilloscope
  
  Soldering tools
IOT-WIRELESS-COMMUNICATION
- IOT-wireless-communication
  GSM/GPRS/GPS
  
  BLUETOOTH MODULE
  
  RF TRANSMITTER AND RECEIVER
  
  WIFI MODULE
  
  I gbee- xbee
  
  RFID READER AND TAG
CNC AND 3D PRINTER COMPONENTS
- cnc-and-3d-printer-components
  
  3D PRINTER 3D PRINTER ACCESSORIES LASER ENGRAVING CNC ACCESSORIES LASER ENGRAVING ACCESSORIES CO2 ACCESSORIES
DEVELOPMENT BOARDS
- DEVELOPMENT BOARDS mega menu item
  - Arduino Boards
  - Arduino-shields
  - Raspberry-pi Boards
  - Raspberry-pi-accessories
  - Programmers-and-debuggers

Search for:

Register or Sign in
- Returning Customer ?
  
  Sign in
  
  Don't have an account ?
  
  Register

SENSOR
- Sensors Megamenu
MOTER AND DRIVER
- MOTOR and DRIVER
  GEAR MOTORS
  
  SERVO MOTORS
  
  BRUSHED MOTORS
QUADCOPTER AND ROBOTIC ACCESSORIES
- quadcopter and robotic accessories
  QUADCOPTER ACCESSORIES
  
  ROBOTIC ARM ACCESSORIES
  
  ROBOTIC CAR ACCESSORIES
ELECTRO-MECHANICAL-COMPONENT
- electro-mechanical-component
  motors
  
  drivers
  
  BEARING
  
  switch
  
  buzzer
  
  relays
  
  solenoid
  
  power supply
  rail and rack
  
  pully idler and belt
  
  fan
  
  motors
  
  drivers circuit
  
  road
  
  rail and rack
ELECTRONIC-COMPONENTS AND INTEGRATED CIRCUIT
- Electronic-components and integrated circuit
  - resistors
  - capacitors
  - crystals_osillators
  - pots-7-trimmers
  - opto-coupler
  - LED
  - diodes
  - transistors
  - SCR
  - TRIMMERS AND POTS
  displays
  
  mosfet
  
  MICROCONTROLLERS
  
  OP-AMPR
  
  voltage-regulators
  
  amplifier-ic-development-boards
  
  clock-and-timer-ic
  
  data-converter-ic
  
  diac and triac
  
  driver-circuit-ic
MEASUREMENT TOOLS
- Measurement ,Tools
  Screw Driver
  
  Battery
  
  Adapter
  
  Glue-Gun Stick
  
  Multimeter
  
  Clamp-meter
  
  Oscilloscope
  
  Soldering tools
IOT-WIRELESS-COMMUNICATION
- IOT-wireless-communication
  GSM/GPRS/GPS
  
  BLUETOOTH MODULE
  
  RF TRANSMITTER AND RECEIVER
  
  WIFI MODULE
  
  I gbee- xbee
  
  RFID READER AND TAG
CNC AND 3D PRINTER COMPONENTS
- cnc-and-3d-printer-components
  
  3D PRINTER 3D PRINTER ACCESSORIES LASER ENGRAVING CNC ACCESSORIES LASER ENGRAVING ACCESSORIES CO2 ACCESSORIES
DEVELOPMENT BOARDS
- DEVELOPMENT BOARDS mega menu item
  - Arduino Boards
  - Arduino-shields
  - Raspberry-pi Boards
  - Raspberry-pi-accessories
  - Programmers-and-debuggers

Search

Search for:
0

HomeCNC AND 3D PRINTER COMPONENTSLASER ENGRAVING ACCESSORIES

LASER ENGRAVING ACCESSORIES

Showing all 34 products

Sort by

Add to wishlist
Makerbase MKS DLC32 WIFI CNC Control Board

MCU ESP32-WROOM-32U（ 32bits）

MCU Frequency 240MHz

FLASH 8192KBytes

RAM 520KBytes

Power Input DC12v/24v

Laser Speed <=8000mm/min

Supports PC engraving

Supports Offline Mode

Supports 3.5 inch Touch TFT LCD

Supports WiFi On Board

Supports Web Control

Supports Mobile APP Control

Supports LaserGRBL

Supports LightBurn
Read more
Add to wishlist
40W LASER MODULE

40W High Power Laser Module

XH2.54-3P socket

Power: Up to 40W

Wavelength: 450nm

Luminous color: blue

Adjustable Focus: Yes, <0.5mm

Input voltage: DC12V

Power: 3.2A(3-3.5A)

Frequency: 0-20KHz

Cooling method: Air cooled

Material: Aluminum alloy Copper

Opitcal system: Optical degree quartz lens group

Customized laser protect case(effective filter laser protects eyes)

It can connected to air pump to achieve better cutting effect

21,500.00Br
21,500.00Br Add to cart
Add to wishlist
GT5 Idler

GT5 Idler

Bore dimaeter 8mm

Idler’s internal width 14.75mm

Idler’s external width 20.15mm

950.00Br
950.00Br Add to cart
Add to wishlist
Nema 17 Stepper Motor 60Ncm

Nema 17 Stepper Motor High Torque 60Ncm

Model: 17HS24-0644S

Motor Type: Bipolar Stepper

Hybride type

Step Angle: 1.8 deg

Holding Torque: 60Ncm

Rated Current/phase: 0.64A

Phase Resistance: 15ohms

Inductance: 32mH ± 20%(1KHz)

Frame Size: 42 x 42mm

Body Length: 80mm

Shaft Diameter: Φ5mm

Shaft Length: 24mm

D-cut Length: 15mm

Number of Leads: 4

Lead Length: 500mm

Weight: 500g

3,500.00Br
3,500.00Br Add to cart
Add to wishlist
Drag Chain

Drag Chain Cable 15*20mm

Internal Size: 15 x 20mm (height*width)

Length: 1 meter

Material : Plastic

2,500.00Br
2,500.00Br Read more
Add to wishlist
CNC Laser Control Board

This control board is a 32-bit MCU control board, which runs faster, the maximum no-load speed reaches 40000mm/min, the algorithm is optimized better, the vibration is smaller when the machine moves at high speed, and the performance is more stable

Using the Type-C USB interface, it is more convenient to use and the data transmission is more stable;

One-piece integrated drive

PWM output frequency 10kHz, higher engraving precision and clearer details

Y-axis dual drive, stronger drive capability;

Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;

5V power output port, and software controllable, easy to expand various functions;

Support USB flash firmware, firmware upgrade is more convenient;

XY limit switch interface each

Self-contained laser anti-burn mode, laser S value >=100, after the laser is turned on, if there is no movement within 5S, an alarm will occur

6,500.00Br
6,500.00Br Add to cart
Add to wishlist
RGB Neon Light

Item type: RGB Neon lights

Lamp luminous efficiency(lm/w): 120

120 Leds/meter

Color rendering index(Ra): 80

Lifespan(hours): 50000

Working time(hours): 50000

Length: 5m

Light source: LED

Color: RGB

Support dimmer: yes

Input voltage: DC 12v

CRI(Ra>): 80

Lamp Luminous Flux(lm): 120

working temperature: 0-60 degree celsius

IP rating: IP67

Application: Outdoor Decoration

Waterproof: IP67 grade waterproof

Controller: IR controller Remote control

Power supply: 12V/5A

Size: 6*12mm

5,500.00Br
5,500.00Br Add to cart
Add to wishlist
Limit Switch V-156-1C25

Limit Switch V-156-1C25

Current rating – 15A

Voltage Rating – AC 250V/125VAC

DC Rating– DC 250V/125V 0.6A/0.3A

Ingress Protection – IP40

350.00Br
350.00Br Read more
Add to wishlist
Coupler 10mm to 14mm

10mm x 14mm Aluminum Coupling for Flexible Shaft Coupling Stepper Motor Connector

Type: flexible shaft coupling.

Material: aluminium

Size: 10mm x 14mm

Outer diameter: 30 mm

Length: 42 mm

1,000.00Br
1,000.00Br Read more
Add to wishlist
Laser Module 40W

40W High Power Laser Module

Power: Up to 40W

Wavelength: 450nm

Luminous color: blue

Adjustable Focus: Yes, <0.5mm

Input voltage: DC12V

Power: > 2a

Frequency: 0-20KHz

Cooling method: radiator and fan cooling

Material: aluminum alloy

Lens: glass

17,500.00Br
17,500.00Br Read more
Add to wishlist
Drag Chain R55

Product Name: Cable Drag Chain

R55 25 x 77mm

Inner diameter: 25x57mm

Color: black yellow

Material: plastic

Length: 1m

Application: CNC Machine Tools

3,000.00Br
3,000.00Br Read more
Add to wishlist
Idler Pulley 625zz

Solid Derlin V-slot Wheel Idler Pulley is compatible with Creality Ender 3, CR-10 / CR-10S / CR-10 S4 / CR-10 S5 and similar 3D printers.

Material: POM/Derlin/black nylon

Outer diameter: 24mm

Inner diameter: 5 mm

Height: 11 mm

Weight: 12g

Simple structure, light weight, easy installation, smooth movement, low noise level, high print quality.

450.00Br
450.00Br Read more
Add to wishlist
Mach3 USB Interface Board

Supports 4-axis linkage, you can connect four stepper motor drives or servo drives

Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor

Supports automatic probe tool

Supports Emergency input

Supports limit switch

Supports electronic handwheel

Provide up to 12 digital signal inputs

Interference design, imported industrial components, high reliability

Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable

Has 0-10V output port, you can use mach3 software to control the spindle motor speed.

4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device

4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device

1 status LED, indicate connection status on the board

4,000.00Br
4,000.00Br Add to cart
Add to wishlist
Jumper Cap

Jumper Cap 2.54mm

Spacing Shorting Block Connection Pin Header

10.00Br
10.00Br Add to cart
Add to wishlist
GT5 Pulley

GT5 Pulley for CNC Machines

1,200.00Br
1,200.00Br Add to cart
Add to wishlist
Pilot Lamp

Product name: LED indicator light

Item No.: AD20-16DS

Hole diameter: 16mm

Color: Red/Yellow/Green

Rated voltage: 220VAC

Rated current: ≤ 20mA

Frequency of use (AC): 50 ~ 60Hz

Continuous lifespan: ≥ 30000h

200.00Br
200.00Br Add to cart
Add to wishlist
Laser Head 2.5w

High Power Laser Module with TTL

Power: Up to 2500mW/2.5W

Wavelength: 445nm-450nm

Luminous color: blue

Adjustable Focus: Yes, <0.5mm

Input voltage: DC12V

Power: > 2a

TTL: Yes, low level (0V): off, high level (5V): on.

Frequency: 0-20KHz

Cooling method: radiator and fan cooling

Material: aluminum alloy

Lens: glass

Size: laser module: 72*42*42mm

Driver board: 82*48*40mm

6,000.00Br
6,000.00Br Read more
Add to wishlist
Laser Safety Glass

Available colours: Green

High-quality materials: Plastic

Nose Space: 22mm

Lens width: 55mm

Lens thickness: 2.5mm

Protection wavelength range: 590nm-690nm

Visible light transmittance: 60%

Optical density: OD 4

Protects the eyes from class 3R, 3B, and Class 4 Laser Systems

Blocks or attenuates the appropriate wavelength range and Optical Density (“OD”)

500.00Br
500.00Br Read more
Add to wishlist
5.5W Laser Head

5.5W laser head

Focus adjustable

Input Voltage 12V

Laser Engraving And Cutting TTL Module

Package includes:

1 Laser Head

1 TTL Module

14,500.00Br
14,500.00Br Add to cart
Add to wishlist
Power Adapter

HHW-96W

Rated input voltage 110VAC-240VAC 1.3A MAX

Power rating 96W

With 8 different types of DC Jacks

Overload and short circuit protected

Ripple noise 500mV

Output Voltage

DC 12V/15V/16V/18V/19V 4.5A

DC 20V/24V 4A

1,800.00Br
1,800.00Br Add to cart
Add to wishlist
Idler

GT2 PULLEY 6MM WIDTH – IDLER

GT2 Idler Pulley Timing Gear For GT2 Belt Width 6mm and it is made with high quality aluminum alloy fits well with GT2 belt width 6mm.

Idler Pulley Without Teeth

250.00Br
250.00Br Read more
Add to wishlist
GT2 Pulley

GT2 Bore 5mm 20 Teeth Timing Aluminum Pulley

Color: silver

Tooth number: 20

Tooth pitch: 2mm

Bore diameter: 5mm

Flange: double

Tooth width: 7mm ( Very Suitable and good for 6mm synchronous belt )

400.00Br
400.00Br Add to cart
Add to wishlist
10mm Coupler

6.4mm to 10mm Flexible Shaft Coupler

Material: Aluminium

Shaft coupler Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.

Perfectly fits with Nema 23 Motor Shaft.

500.00Br
500.00Br Add to cart
Add to wishlist
8mm Coupler

10MM COUPLER

5mm to 8mm Flexible Shaft Coupler

Material: Aluminium

Shaft coupler Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc.

450.00Br
450.00Br Add to cart
Add to wishlist
GT5 Timing Belt

T5 steel reinforced Timing Openloop Belt 15mm wide

15MM PU Open Belt T5 Timing Belt

Width 15mm

Polyurethane

steel core

Fit for CNC machines,Laser machine,Engraving machine,and cutting machine.

950.00Br
950.00Br Add to cart
Add to wishlist
8mm Linear Bearing with Housing

SC8UU 8mm Linear Ball Bearing Block

Type Of Bearing : Linear Bearing

Material : Stainless Steel

Dimension : H-22mm,W-34mm,L-30mm

Tolerance : 0 – 0.009

Weight 52g

Used in CNC machines, linear stages, 3D printers and other devices that utilize 8mm diameter linear shafts.

500.00Br
500.00Br Add to cart
Add to wishlist
10mm Linear Bearing with Housing

Model: SC10 UU

Material: Bearing Steel

Bore Size: 10mm

Tolerance: 0 – 0.009

Weight: 92g

Dimension: H-20mm,W-40mm,L-35mm

Used in CNC machines, linear stages, 3D printers and other devices that utilize 10mm diameter linear shafts.

750.00Br
750.00Br Read more
Add to wishlist
12mm Linear bearing with Housing

Used in CNC machines, linear stages, 3D printers and other devices that utilize 12mm diameter linear shafts.

1,250.00Br
1,250.00Br Add to cart
Add to wishlist
16mm Linear Bearing with Housing

SC16UU 16mm Linear Bearing

SC16UU Housing With Linear Bearing Slider Bushing, Bearing For 16mm Shaft

Dimension : H-38.5mm,W-50mm,L-44mm

Material : Stainless Steel

Bore Size : 16mm

Tolerance : 0-0.009

Rust Proof

SBR16UU 16mm Linear Bearing

Main parts:Aluminum housing LM16UU-OPen linear ball bearings

The built-in material: Bearing Steel

Bore size:16mm

Dimension : H-31mm,W-44mm,L-44mm

1,300.00Br
1,300.00Br Add to cart
Add to wishlist
GRBL CNC shield

4 Axis Arduino CNC shield Grbl

GRBL 0.8c compatible.

4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)

2 x End stops for each axis (6 in total)

Spindle enable and direction

Coolant enable

Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others)

Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )

Stepper Motors can be connected with 4 pin molex connectors.

Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

Arduino CNC Shield is the PCB you need to control the stepper motors.

This PCB is perfect if you want to assemble your first CNC low cost machine such as a laser cutter, using an Arduino Uno.

It is totally compatible with the popular GRBL firmware.

It supports up to 4 motors with A4988 or DRV8825 drivers.

950.00Br
950.00Br Add to cart
Add to wishlist
GRBL 4 Axis Stepper Motor Controller

Product Name: 4 Axis 3.0 Control Board

Product Specifications: 4 Axis

Product Size: 122mm*87mm

Product Weight: 150g

Operating System: Window/Linux/Mac

Interface Type: Type C

Supply Voltage: DC24V- 5A

Software Support: Candle/LaserGRBL/LightBurn/USG

11,500.00Br
11,500.00Br Add to cart
Add to wishlist
JST connector 4 pin

4 Pin JST-XH Connector

2.54mm Pitch

Female type

24AWG connection wire

wire length 30cm

Uniform insulation thickness to ensure easy stripping and cuttin

100.00Br
100.00Br Read more
Add to wishlist
4 Axis TB6560 CNC Controller

The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.

Flush type low heat The area of the chip can support itself to cool when the current is low

Supports a lot of stepper motors

The advantages in the high-speed running condition

4-wire 0-3.5A normally 3A , the 3.5A is the peak currentcan be regulated rate current output, bipolar stepper motor driver.

Standard parallel port , supports Mach2/3,EMC2, KCAM 4 etc.

Optical isolated (IO) and DCDC power isolated to protect the PC parallel port and other equipments.

Limit and emergency stop port ( standard DB9 port)

4 working modes: mixed mode , fast mode, slow mode, standard mode

microstep: 1 1/2 1/4 1/16 .

12-36V single power input uses the switch power chip as the 5V power supply, stable and low heat.

Adopts RC 7414 auto semi-flow .

The relay output can control the main axis .

5th axis extension control port .

8,500.00Br
8,500.00Br Read more
Add to wishlist
GT2 Timing Belt

Length: Open ended

Width: 5mm

Type: GT2 Open Timing Belt

400.00Br
400.00Br Add to cart

Categories

CNC AND 3D PRINTER COMPONENTS
CONNECTORS/CABLES AND CIRCUIT BOARDS
DEVELOPMENT BOARDS
ELECTROMECHANICAL COMPONENTS
ELECTRONIC COMPONENTS AND INTEGRATED CIRCUITS
IOT WIRELESS COMMUNICATION
KITS
MEASUREMENT-TOOLS
MODULES
MOTORS, CONTROLLERS AND DRIVERS
Others
QUADCOPTER AND ROBOTIC ACCESSORIES
SENSORS

Price

Min price Max price

Price: —

100% Payment
Secured
Support lots
of Payments
24hours/7days
Support
FastDelivery
Best Price
Guaranteed
Mobile Apps
Ready

Easy and trusted online shop in Ethiopia

Follow us on :

Need help?

Call us +251 993802995
E-mail us info@iVector4engineering.com
Join our Telegram
t.me/vectorfour

Product categories

Customers Area

About Us
Blog
Checkout
Contact Us
My account
Shop
Cart

Download Apps

Join Our News Letter

© Copyright 2023vector4engineering - All Rights Reserved Developed By ItEthiopia