Shop
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
HOTEND CREALITY CR-10S PRO
- Material: aluminum
- Nozzle: brass 0.4mm
- Filament Ø: 1.75mm
- Voltage: 24V / 40W
- Cable length: approx. 1m
- 3D printers of the CR-10S Pro/CR-10S PRO V2/CR-10 MAX
- including heating cartridge (24V 100W)
- incl. temperature sensor (100k-Thermistor)
- incl. brass nozzle (1.75mm 0.4mm)
- incl. Bowden connector (PC4-01)
- incl. Bowden tube (approx. 0.5m)
- incl. heat sink (1.75mm)
- incl. silicon sleeve for the heating block
- Including heating block or mounting block
- Mount or tighten parts if necessary
- replaces old, defective printheads
- Nozzle CR-10S Pro 0.4mm MK8 Nozzle (M6-0.75 Thread)
- Heater Block CR-10S Pro Heater Block (M6-0.75)
- Heatbreak CR-10S Pro Heatbreak (M6-0.75)
- Cooling Tower CR-10S Pro Cooling Tower (M6-0.75)
- Bowden Tube Capricorn XS Series PTFE Tubing
- Thermistor 100k 1% NTC
- Operating Temperature -45° to +260°C
3D Printer Compatibility
- Creality CR-10
- Creality CR-10S
- Creality CR-10 V2
- Creality CR-10 Mini
- Creality CR-10 Max
- Creality CR-10S Pro
- Creality CR-10S5
- Creality CR-10S Pro V2
- Creality CR-6 MAX
- Creality CR-10S Pro V3
- Creality CR-10S Pro V4
-
-
-
-
-
-
-
-
-
-
-
-
2 Channel Solid State Relay
- 2 channel 2 AMP Solid State Relay board
- Control 2 loads of up to 2 amps each at 120V or 240V AC.
- Good for lighting, holiday displays etc.
- Input control signal voltage:
- 0-0.5V the state of low-level relay ON
- 0.5-3.3V Unknown State
- 3.3-5V high-level relay OFF
- Operating Voltage: 5V
- Operating Current: 16mA
- Maximum Load: 2A @ 240VAC
- A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
S8550 Transistor
- S8550 PNP Transistor
- Low Voltage, High Current PNP Transistor
- Continuous Collector current (IC) is 500mA
- Collector-Emitter voltage (VCEO) is -25 V
- Collector-Base voltage (VCB0) is -40V
- Emitter Base Voltage (VBE0) is -5V
- Current Gain (hFE), 85 to 300
- Commonly used as Class B Push-pull transistors
- S8550 Equivalent Transistor BC527, KSA708, MPS750
- Alternative PNP Transistors BC557, 2N3906, A1015, 2SA1943, BD140
-
-
-
-
-
-
S9015 PNP Transistor
- S9015 PNP Transistor
- Transistor Type: PNP
- Max Collector Current(IC): –100mA
- Max Collector-Emitter Voltage (VCE): –45V
- Max Collector-Base Voltage (VCB): –50V
- Max Emitter-Base Voltage (VEBO): –5V
- Max Collector Dissipation (Pc): 400 miliWatt
- Max Transition Frequency (fT): 150 MHz
- Minimum & Maximum DC Current Gain (hFE): 60 – 1000
- NPN Complementary of S9015 is S9014
- Max Storage & Operating temperature Should Be: -55 to +150 Centigrade
-
-
-
-
-
-
-
S9012 PNP Transistor
- S9012 PNP Small Signal Transistor
- Transistor Type: PNP
- Max Collector Current(IC): -500mA
- Max Collector-Emitter Voltage (VCE): -20V
- Max Collector-Base Voltage (VCB): -40V
- Max Emitter-Base Voltage (VBE): -5V
- Max Collector Dissipation (Pc): 625 Milliwatt
- Max Transition Frequency (fT): 100 MHz
- Minimum & Maximum DC Current Gain (hFE): 64 to 202
- Max Storage & Operating temperature Should be: -65 to +150Centigrade
- NPN Complementary of S9012 is S9013
-
-
-
-
-
-
-
1N5819 Schottky Diode
- The 1N5819 is a Schottky diode with a low forward voltage drop and high switching speed. It is commonly used in high frequency applications like Inverters, DC-DC converters etc.
- Schottky Rectifier Diode
- Average forward current is 1A
- Forward Surge Current is 25A
- Forward Voltage Drop 600mV at 1A
- Peak reverse voltage is 40V
- RMS Reverse Voltage is 28V
-
-
-
-
-
-
-
-
-
-
-
-
-