Name: L293D Motor Shield
SKU: 7906
Price: 1250.00 ETB
Availability: InStock

L293D Motor Shield

Br 1,250.00

Operating Voltage: 4.5 to 12V
Logic Control Voltage Vss: 4.5~5.5V
This motor driver shield can drive up to 4 DC motorsor 2 servo motors or 2 stepper�
This motor driver shield uses a 2x L293D motor controller chip with a 74HC595 shift register for all of its functions
It has 2 connections for 5v servos connected to the arduino’s high-resolution dedicated timer
It’s 4 H-bridges and l293d chipset provide 0. 6A per bridge
It comes with thermal shutdown protection and internal kickback protection diodes
It can run motors on 4. 5vdc to 25vdc
It provides up to 4 bi-directional dc motors with individual 8-bit speed selection with single coil, double coil or interleaved stepping
The pull-down resistors keeps motors disabled during power-up
It has big terminal block connectors to easily hook up wires and power arduino reset button brought up top 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies

This shield is driven by 2 L293D chips, which are very strong 4-channel drivers. Because of the power of these chips, this shield can control 4 DC motors or 2 stepper / servo motors. This board can control four channels with 0.6A (1.2A peak) with heat protection and can supply a voltage of 4.5V to 36V DC (external power supply possible)
2 interfaces for 5V Servo connected to the Arduino’s high resolution timer
Can control 4 DC motors or 2 stepper motors or 2 servos
Up to 4 bi-directional DC motors with individual speed control
4 H-Bridges: per H-Bridge 0.6A (1.2A peak) 4.5V to 36V DC
With pull down resistors to switch off the motors during start-up

L293D Motor Shield

You may also like…