The STM32 Nucleo-64 board provides a flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features provided by the STM32 microcontroller. For the compatible boards, the internal or external SMPS significantly reduces power consumption in Run mode.
The ARDUINO® Uno V3 connectivity support and the ST morpho headers allow the easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.
The STM32 Nucleo-64 board does not require any separate probe as it integrates the ST-LINK debugger/programmer.
The STM32 Nucleo-64 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package.
STM32 microcontroller in an LQFP64 or LQFP48 package
1 user LED shared with ARDUINO®
1 user and 1 reset push-buttons
32.768 kHz crystal oscillator
ARDUINO® Uno V3 expansion connector
ST morpho extension pin headers for full access to all STM32 I/Os
Flexible power-supply options: ST-LINK USB VBUS or external sources
Comprehensive free software libraries and examples available with the STM32Cube MCU Package
Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
Second user LED
Boot push-button
External or internal SMPS to generate Vcore logic supply
24 MHz or 48 MHz HSE
User USB Device full speed, or USB SNK/UFP full speed
Cryptography
CAN FD transceiver
On-board ST-LINK (ST-LINK/V2-1, STLINK-V3E, STLINK-V2EC, or STLINK-V3EC) debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port
It is a flexible hardware prototyping platform by STMicroelectronics. It allows you to build and test applications using the STM32G071RB microcontroller, a 32-bit ARM Cortex-M0+ chip known for its high efficiency and rich feature set.
STM32 Nucleo-64 development board with STM32G071RB MCU, supports Arduino and ST morpho connectivity.
Microcontroller features
Core: Arm® 32-bit Cortex®-M0+ CPU, frequency up to 64 MHz
Memories
Up to 128 Kbytes of Flash memory
36 Kbytes of SRAM (32 Kbytes with HW parity check)
CRC calculation unit
Reset and power management
Voltage range: 1.7 V to 3.6 V
Power-on/Power-down reset (POR/PDR)
Programmable Brownout reset (BOR)
Programmable voltage detector (PVD)
Low-power modes:Sleep, Stop, Standby, Shutdown
VBAT supply for RTC and backup registers
Clock management
4 to 48 MHz crystal oscillator
32 kHz crystal oscillator with calibration
Internal 16 MHz RC with PLL option (±1 %)
Internal 32 kHz RC oscillator (±5 %)
Up to 60 fast I/Os
All mappable on external interrupt vectors
Multiple 5 V-tolerant I/Os
7-channel DMA controller with flexible mapping
12-bit, 0.4 μs ADC (up to 16 ext. channels)
Up to 16-bit with hardware oversampling
Conversion range: 0 to 3.6V
Two 12-bit DACs, low-power sample-and-hold
Two fast low-power analog comparators, with programmable input and output, rail-to-rail
14 timers (two 128 MHz capable): 16-bit for advanced motor control, one 32-bit and five 16-bit general-purpose, two basic 16-bit, two low-power 16-bit, two watchdogs, SysTick timer
Calendar RTC with alarm and periodic wakeup from Stop/Standby/Shutdown
Communication interfaces
Two I2C-bus interfaces supporting Fast-mode Plus (1 Mbit/s) with extra current sink, one supporting SMBus/PMBus and wakeup from Stop mode
Four USARTs with master/slave synchronous SPI; two supporting ISO7816 interface, LIN, IrDA capability, auto baud rate detection and wakeup feature
Low-power UART
Two SPIs (32 Mbit/s) with 4- to 16-bit programmable bitframe, one multiplexed with I2S interface
HDMI CEC interface, wakeup on header reception
USB Type-B™ Power Delivery controller
Development support: serial wire debug (SWD)
96-bit unique ID
All packages ECOPACK®2 compliant
Reviews
There are no reviews yet.
Be the first to review “STM32 Nucleo-64 Development Board”Cancel Reply
Reviews
There are no reviews yet.