+251 99 380 2995 | +251 97 022 2227 | [email protected]


Operational Amplifier LM324
Br 100.00
- The LM324 Quad Operational Amplifier is an integrated circuit that contains four independent, high-gain, frequency-compensated operational amplifiers on a single silicon chip.
- Four high gain operational amplifiers in a single package.
- The DC gain of each op-amp is 100dB.
- All four op-amps can be operated from a single supply.
- Operated from wide supply voltage from 3V to 32V.
- Input and output is protected from overload.
- Very low operating current drain 700uA to 800uA
- Maximum bandwidth is 1MHz.
- The IC can be easily used with logic devices and microcontrollers.
- Thanks to its standard pinout structure.
- Internally short circuit protected.
- LM324 is a famous operational amplifier IC, it is widely used in commercial devices and also used by electronic hobbyists, engineering students, engineers, and tinkerers around the world.
- The IC contains four high gain operational amplifiers which are independent from each other. You can use one or two op-amp from the four or you can also use four at once. The power supply input for all the fours op-amp Pin4 (Positive Supply) and Pin11 (Ground / Negative Supply
- The minimum operating voltage is only 3VDC and the minimum current consumption is only 0.7mA to 0.8ma therefore this IC can be used where high gain and low power and current consumption circuitry is required for example in portable and battery operated devices.
Pin Configuration
- Pin 1(Output 1) Output of IC’s First Operational Amplifier
- Pin 2(Input1(-) / Inverting Input 1) Inverting Input of IC’s First Operational Amplifier
- Pin 3(Input1(+) / Non Inverting Input 1) Non Inverting Input of IC’s First Operational Amplifier
- Pin 4(Vcc / Positive Supply) Positive Supply of IC / Positive Supply of All Operational Amplifiers
- Pin 5(Input1(-) / Inverting Input 2) Inverting Input of IC’s Second Operational Amplifier
- Pin 6(Input1(+) / Non Inverting Input 2) Non Inverting Input of IC’s Second Operational Amplifier
- Pin 7(Output 2) Output of IC’s Second Operational Amplifier
- Pin 8(Input1(-) / Inverting Input 3) Inverting Input of IC’s Third Operational Amplifier
- Pin 9(Input1(+) / Non Inverting Input 3) Non Inverting Input of IC’s Third Operational Amplifier
- Pin 10(Output 3) Output of IC’s Third Operational Amplifier
- Pin 11(Ground) Ground / Negative Supply of IC / Negative Supply of All Operational Amplifiers
- Pin 12(Input1(-) / Inverting Input 4) Inverting Input of IC’s Forth Operational Amplifier
- Pin 13(Input1(+) / Non Inverting Input 4) Non Inverting Input of IC’s Fotrh Operational Amplifier
- Pin 14(Output 4) Output of IC’s Forth Operational Amplifier
Application
- Sensor Circuits
- Small Signal Amplification
- General Operational Amplifiers Circuits
- Audio preamplifiers
- Filters
- Comparator Applications
You may also like…
-

Operational Amplifier NE5532
Br 50.00 -

Operational Amplifier LM358
Br 50.00 -

Operational Amplifier TL084
Br 100.00 -

Operational Amplifier LM741
Br 50.00










Reviews
There are no reviews yet.